 | Diesel Engine Setting/Locking Kit - Ford & VAG - Belt Drive (List Price £78.45 exc VAT) VS1011 Ref: SVS1011
• Suitable for setting and locking most Ford diesel engines except Focus, but including 1.8TD/DI and Galaxy.
• Also incorporates tools for locking VW, Audi, Volvo, Mazda 121, Seat and Skoda.
• Supplied in carry-case with operating guide and warning tag.
Price: £48.48 (£58.18 Including: VAT at 20%)
|
|
|
 | Crankshaft Pulley Remover & Installer - Ford (List Price £139.95 exc VAT) VS1013 Ref: SVS1013
• Suitable for removal and installation of free-floating crankshaft pulley.
• Essential tool for timing belt replacement on certain Zetec 16v engines.
• The only way to perform timing belt replacement without risk of damage to the engine.
Price: £93.70 (£112.44 Including: VAT at 20%)
|
|
|
 | Crank Pulley Holding Tool - Ford 1.8, 2.0 Duratec (List Price £102.45 exc VAT) VS4736 Ref: SVS4736
• Counter-holds the crankshaft pulley while the pulley retaining bolt is loosened/tightened.
Price: £68.59 (£82.31 Including: VAT at 20%)
|
|
|
 | Diesel Engine Setting/Locking Kit - Ford 1.4, 1.6 TDCi 1.8 DT/TDCi/TDdi, 2.0TDCi - Belt Drive (List Price £146.95 exc VAT) VS4830 Ref: SVS4830
• Comprehensive kit covers all current Ford 1.4, 1.6, 1.8 and new 2.0TDCi diesels giving extensive coverage of all the modern Ford belt drive Duratorq diesel engines.
• Includes camshaft, crankshaft and high pressure pump locking tools plus camshaft sprocket removal tool. 1.4 and 1.6TDCi Diesels are also in Citroen and Peugeot models designated as HDi.
• Kit includes locking tag.
Price: £98.38 (£118.06 Including: VAT at 20%)
|
|
|
 | Diesel Engine Auxiliary Belt Tension Tool - Ford 2.0, 2.2 TDdi/TDCi (List Price £37.95 exc VAT) VS4833 Ref: SVS4833
• Specifically designed to aid the task of reaching the auxiliary belt tension unit in order to remove and re-fit timing belts on this TDCi engine.
• Tension unit cannot be accessed and adjusted with any other general tools.
Price: £25.41 (£30.49 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Diesel/Petrol Engine Flywheel Locking Tool Set - Ford - Belt/Chain Drive (List Price £45.45 exc VAT) VS4834 Ref: SVS4834
• Locks crankshaft in timed position by locating into flywheel.
• Also suitable for counter-holding crankshaft when releasing or tightening crankshaft pulley bolts.
• Supplied with locking tag.
Price: £30.43 (£36.52 Including: VAT at 20%)
|
|
|
 | Diesel Engine Timing Kit- Land Rover/Volvo 2.0, 2.2 - Belt Drive (List Price £54.95 exc VAT) VS5015 Ref: SVS5015
• Kit contains camshaft and flywheel locking tools, for the safe timing belt replacement on 2.0 & 2.2 diesel engines fitted to Ford, Land Rover & Volvo vehicles.
• Supplied with comprehensive instructions.
Price: £36.79 (£44.15 Including: VAT at 20%)
|
|
|
 | Diesel Engine Setting Locking Kit - Ford - Belt Drive (List Price £34.95 exc VAT) VSE101 Ref: SVSE101
• Suitable for Ford 1.6 and 1.8 diesel engines as fitted to Fiesta, Escort, Orion, P100, Sierra, Mondeo. Transit 2.5DI (85on) and Galaxy 1.9TD.
• Supplied in carry-case.
Price: £18.00 (£21.60 Including: VAT at 20%)
|
|
|
 | Petrol Engine Crankshaft Locking Pin - Belt Drive (List Price £5.95 exc VAT) VSE4143.32 Ref: SVSE4143.32
• Pin is screwed into the side of the engine to lock the crankshaft so that the pulley retaining bolt can be loosened/tightened.
• Applies to Zetec/Duratec engines in Fiesta, Fusion and Focus.
• Also suitable for some Mazda and Volvo vehicles.
Price: £3.16 (£3.79 Including: VAT at 20%)
|
|
|
 | Petrol Engine Setting/Locking Kit - Ford 1.6VCT-Ti - Belt Drive (List Price £59.95 exc VAT) VSE5041 Ref: SVSE5041
• Kit covers timing belt replacement on Ford 1.6 Duratec engines with variable valve timing.
• Camshaft, crankshaft and flywheel pins are also suitable for many other petrol and diesel Ford engines.
• Supplied in storage case.
Price: £38.52 (£46.22 Including: VAT at 20%)
|
|
|
 | Petrol Engine Setting/Locking Kit - Ford & Mazda - Belt/Chain Drive (List Price £19.95 exc VAT) VSE5515 Ref: SVSE5515
• Includes revised design camshaft setting plate and tensioner locking pin.
• This kit covers the complete range of Ford Duratec engines 1.25 through to 2.0 16v in both belt and chain drive variants.
• Pins also suitable for some Mazda vehicles.
Price: £13.97 (£16.76 Including: VAT at 20%)
|
|
|
 | Diesel Engine Setting/Locking & Injection Pump Tool Kit - 2.0, 2.2, 2.4 Duratorq - Chain Drive (List Price £139.95 exc VAT) VSE5841 Ref: SVSE5841
• Comprehensive kit for timing 2.0, 2.2 and 2.4 Duratorq chain driven diesel engines.
• Also Includes sprocket retaining plate and access cover removal plate tools, for injection pump removal/installation.
• Supplied in carry-case.
Price: £89.65 (£107.58 Including: VAT at 20%)
|
|
|
 | Diesel Engine Setting/Locking Tool Kit - Ford 2.0, 2.4 Duratorq - Chain Drive (List Price £19.95 exc VAT) VSE5842 Ref: SVSE5842
• Provides timing retention for Ford 2.0 and 2.4 Duratorq chain diesel engines.
• Kit comprises Flywheel Locking Pins, Camshaft and Injection Pump Locking Pins, Tensioner Locking Pin.
Price: £12.65 (£15.18 Including: VAT at 20%)
|
|
|
 | Diesel Engine Timing Kit - Ford 1.8 TDDi/TDCi - Chain Drive (List Price £82.95 exc VAT) VSE5843 Ref: SVSE5843
• Essential tools for timing 1.8 TDDi/TDCi chain drive diesel engines fitted to Ford vehicles.
• Features injection high pressure fuel sprocket removal and timing chain cover alignment tools.
• Supplied in storage case.
Price: £51.26 (£61.51 Including: VAT at 20%)
|
|
