 | FRANKLIN 11pc BRAKE CALIPER SERVICE SET Ref: FRTA870
It is suitable for both push back and wind back systems. There is guidance details on the back so you know which adaptors to use on which make of car.
(See extended info for list)
Price: £52.95 (£62.22 Including: VAT at 17.5%)
|
|
|
 | BERGEN BRAKE CLIP TOOL Ref: AA135
-Tool for removing and installing brake clips and nails on brake shoes
-Ideal for any busy workshop.
Price: £5.50 (£6.46 Including: VAT at 17.5%)
|
|
|
 | BERGEN BRAKE CALIPER SINGLE Ref: AA077
Price: £11.49 (£13.50 Including: VAT at 17.5%)
|
|
|
 | BERGEN 7 PC. IMPACT DRIVER (NEW) Ref: AA500
Price: £5.10 (£5.99 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
 | FRANKLIN MASTERFLARE HAND-HELD BRAKE FLARING TOOL Ref: FR2000
The Franklin MASTERFLARE features a robust compact design, ideal for on vehicle professional use.
-The tool holds the pipe firmly in place to consistently produce high quality 3/16" (4.75mm) single & double flares on copper, cupro-nickel or steel tubing.
Also suitable for off vehicle use in a bench vice - if preferred.
-This comes with clear instructions on how to use and which items to use.
Price: £64.50 (£75.79 Including: VAT at 17.5%)
|
|
|
 | BERGEN PIPE BENDING PLIER Ref: AA133
Features:
sizes - 1/4", 3/16", 5/16" and 3/8"
Price: £11.00 (£12.93 Including: VAT at 17.5%)
|
|
|
 | US PRO TOOLS 6pc BRAKE SPANNER SET Ref: AA242
-Ideal for undoing brake pipes and compression joint fittings.
Features:
-Sizes: 9 x 11mm, 10 x 12mm, 13 x 14mm, 15 x 17mm, 16 x 18mm, 19 x 21mm
-Made from highest quality Chrome Vanadium
-Comfortable grip & comes in heavy duty storage pouch
Price: £14.04 (£16.50 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
| | FRANKLIN MASTERFLARE HAND-HELD BRAKE FLARING TOOL Ref: FR2000
The Franklin MASTERFLARE features a robust compact design, ideal for on vehicle professional use.
-The tool holds the pipe firmly in place to consistently produce high quality 3/16" (4.75mm) single & double flares on copper, cupro-nickel or steel tubing.
Also suitable for off vehicle use in a bench vice - if preferred.
-This comes with clear instructions on how to use and which items to use.
Price: £64.50 (£75.79 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Tube Flaring Set 3/16" + 1/4" Ref: FRAB02
Tube Flaring Set - Double Lap
Heavy duty, professional quality, flaring set
complete with 3/16” (4.75mm) SAE and 1/4”
die sets and punches for most popular brake
and clutch pipes. Features automatic line up
and release of the flared tube.
Spare die sets and punches are available :
Price: £160.00 (£188.00 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN EXHAUST PIPE CUTTER SET Ref: FRAF580
Cuts and flares the tube end to accept a connecting pipe. Capacity 35-50mm + 50-65mm diameter for use on stainless steel pipes up to 3.2mm thick
-A professional quality tool - patented design cleanly cuts the pipe and flares the tube end to accept a connecting pipe. Suitable for use in a confined space where access is restricted.
-Cutting Capacity: 35 - 50mm + 50 - 65mm diameter for use on stainless steel pipes up to 3.2mm.
-Supplied with 2 + 1 spare cutters. Expexted cutter service life 200+ pipes. Spare consumable cutters are available.
-Packed in a strong polypropylene case.
Price: £84.50 (£99.29 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Pipe Bending Plier 3/16"- 3/8" Ref: FRTA763
Pipe Bending Plier
Supplied with two roller adaptors.
Suitable for bending 3/16", 1/4", 5/16", 3/8"
copper and steel tubing without kinking.
Price: £9.54 (£11.21 Including: VAT at 17.5%)
|
|
|
| | FRANKLIN 11pc BRAKE CALIPER SERVICE SET Ref: FRTA870
It is suitable for both push back and wind back systems. There is guidance details on the back so you know which adaptors to use on which make of car.
(See extended info for list)
Price: £52.95 (£62.22 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Disc Brake Piston Spreader Ref: FRTA898
Brake Disc Pad Spreader
For disc pad replacement on popular push back
type systems as used by Alfa Audi Ford Nissan
GM Opel, Peugeot Renault Rover Volkswagen etc.
Price: £19.94 (£23.43 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Piston Windback Tool Ref: FRTA891
TA890 Driver, Reaction Plate, A1 Adaptor
Price: £20.79 (£24.43 Including: VAT at 17.5%)
|
|
|
| | FRANKLIN Brake Caliper Windback Tool A2 Ref: FRTA892
TA890 Driver, Reaction Plate, A2 Adaptor
Price: £22.30 (£26.20 Including: VAT at 17.5%)
|
|
|
| | FRANKLIN Brake Caliper Windback Tool A4 Ref: FRTA894
TA890 Driver, Reaction Plate, A4 Adaptor
Price: £22.30 (£26.20 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Disc Pad Spreader Ref: FRTA895
Brake Disc Pad Spreader
Contents: TA890 Driver and Reaction Plate
with A3 Push Back Swivel Adaptor.
(see above for applications).
Price: £20.40 (£23.97 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Pressure Brake Bleeder Ref: FRAF402
Pressure Brake Bleeder
For changing / bleeding hydraulic fluids on
vehicle brake and clutch systems (including
ABS). Suitable for “one man” use on systems
with a standard M42 reservoir cap (as used
on most European and some Japanese cars
and light commercials). 1.9 litre capacity.
Price: £65.25 (£76.67 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN LH Brake Piston Windback Tool Ref: FRTA896
Left Hand Brake Piston Wind Back Tool
For use when replacing disc pads on Citroen C5 and Renault
Master models. Also suitable for use on certain Ford Mondeo
models (when used with TA870 / TA890 / TA891).
Price: £25.16 (£29.56 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Caliper Piston Tool Set Ref: FRTA890
7 pce Brake Caliper Service Set
Comprehensive brake servicing kit for use
when replacing worn brake pads on both
push-back and wind-back calipers. Threaded
Driver and Reaction Plate with five adaptors :
A1 Applications as shown above for No 7 (18901)
A2 Rover 200/400, Honda Concerto,
CRX Prelude, Mazda, Mitsubishi. (18902)
A3 Applications as shown above for No 3 (18903)
A4 Audi 90, 100, 200, VW Golf GTi (to 1987).
(Adaptor spare part no 18904)
A5 Applications as shown above for No A (18905)
Supplied in a polypropylene case.
Price: £53.55 (£62.92 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Windback Cube 3/8" dr Ref: FRTA899
Universal Cube Adaptor
Six sided adaptor for use with TA890 Driver
assembly or standard 3/8” sq dr accessories
Price: £10.13 (£11.90 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Spring Pliers Ref: FRTA759
Brake Spring Pliers
Universal pliers for removing / replacing
drum shoe return springs. Special jaw
design clears the brake shoe and easily
slips under the spring. Suitable for most
cars and light commercials.
Price: £7.95 (£9.34 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN D/E Brake Spring Washer Tool Ref: FRTA758
Brake Spring Washer Tool
Double ended tool with simple push and
twist action. For the removal / replacement
of large and small anti-rattle spring washers
as used on drum brake assemblies.
Price: £7.07 (£8.31 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 6 pce Flare Nut Wrench Set Ref: FRTA750
6 pce Flare Nut Wrench Set
Professional Quality. Chrome vanadium
steel - fully polished. 8 x 9 mm, 10 x 11 mm,
10 x 12 mm, 11 x 13 mm, 12 x 14 mm, 14 x 17 mm
Price: £23.94 (£28.13 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Hand Held Flaring Tool Ref: FRF2000
The Franklin MASTERFLARE features a robust compact design, ideal for on vehicle professional use.
-The tool holds the pipe firmly in place to consistently produce high quality 3/16" (4.75mm) single & double flares on copper, cupro-nickel or steel tubing.
Also suitable for off vehicle use in a bench vice - if preferred.
-This comes with clear instructions on how to use and which items to use.
Price: £67.73 (£79.58 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Hose Clamp - Screw type Ref: FRTA770
Hose Clamp - Screw Type
For brake and fuel lines - rounded section
helps to prevent damage to the hose lining.
Price: £7.36 (£8.65 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
 | FRANKLIN Steel Brake / Fuel Hose Clamp Ref: FRTA765
Hose Clamp
Steel clamp with slide action locking collar
for use on brake and fuel lines. Smooth round
edge jaws to prevent damage to hose body.
Flexible Line Clamps
Lightweight, non conductive, strong,
high visibility, Nylon composite clamps.
Suitable for one handed use and with
smooth round edge jaws to prevent
damage to hose body.
Price: £5.00 (£5.88 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 4 in 1 Brake Cylinder Hone Ref: FRTA130
4 in 1 Cylinder Hone Set
Featuring adjustable range and pressure
for bore diameters from 18mm to 89mm.
Use with a variable speed electric
drill or air tool.
Small Brake Cylinders - 18-64 mm
twin leg / 1 1/8” stones / medium collar
Brake / Clutch Cylinders - 19-68 mm
small triple leg / 1 1/8” stones / medium collar
Disc Caliper Cylinders - 18-64mm
large triple leg / 3/4” stones / large spring
Small Engine Cylinders - 32-89 mm
large triple leg / 2” stones / large spring
Price: £20.12 (£23.64 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Bleeder Set Ref: FRTA131
Brake Bleeder Set
Fluid collection bottle (with magnetic
holder), tubing and 3 nylon connectors.
Price: £5.45 (£6.40 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Fluid Tester Ref: FRAF410
Easy to use with simple
GREEN / AMBER / RED LEDs
to clearly indicate pass / fail / warning
if the moisture level is over 1.5%
Price: £35.96 (£42.25 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Vacuum Brake Bleeder Ref: FRAF404
Vacuum Brake Bleeder - 1 litre
Simple one man operation provides quick
clean and efficient operation without the
need for multiple brake reservoir caps for
different applications. Uses standard
workshop air supply (90-120 psi) to remove
brake fluid via the bleed nipples either for
bleeding or for complete fluid replacement.
Price: £29.97 (£35.21 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Cylinder Hone Ref: FRTA135
Adjustable Brake Cylinder Hone
Suitable for honing / deglazing brake cylinders
from 25-62mm (1”-2 1/2") bore diameter.
Spring tension adjustment gives positive cutting
action. 1 1/8” medium grade stones. For use
with either an electric drill or an air tool.
Price: £7.85 (£9.22 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Brake Cylinder Clip Insert Tool Ref: FRTA138
Brake Cylinder Clip Insert Tool
Designed to enable the drum brake wheel
cylinder retaining clip to be easily inserted
into the circlip groove. Supplied with metric
and imperial threads for use on both early
and later models. Ford Transit, Metrocab,
TX1 Taxi, Fairway Driver, Mini Metro etc.
Price: £10.58 (£12.43 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN LOCK NUT REMOVAL TOOL Ref: FRAFT10
FEATURES
-As used by leading roadside recovery operations
-This is a patented tool designed to enable bona fide motor traders/ tyre fitting bays to remove rounded wheel nuts and locking wheel nuts in an emergency, when the original security key has been lost or mislaid.
-This professional quality tool is manufactured in Sheffield to high standards using S1 steel for the blades allowing it to be used with an air impact wrench.
-Comes with clear instructions on how to use and which items to use with which locking nut. See photo below for picture of chart:
N.B. This product is intended solely for the use of bona fide motor traders/ tyre fitting bays to assist customers when the original security key is lost.
Price: £98.50 (£115.74 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Wheel Nut Removal Set A B + C Ref: FRAFT25
Price: £121.50 (£142.76 Including: VAT at 17.5%)
|
|
|
| | FRANKLIN Wheel Nut Removal Set + Driver Ref: FRAFT26
Price: £153.00 (£179.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 7pce Lock Nut Removal Tool Set Ref: FRFT707
7 pce Wheel Locknut Removal Tool Set
17, 18.5, 20, 21.5, 23, 24.5, 26 mm
Special reverse left hand threaded sockets for
removing damaged nuts & studs - also suitable
for use on some security locking wheel nuts
where the key has been lost or damaged.
Price: £35.55 (£41.77 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 3pc Alloy Wheel Nut Set Ref: FRFT704
3 pce Alloy Wheel Nut Sockets
Deep 17 19 & 21mm x 1/2 dr
Price: £20.88 (£24.53 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Wheel Nut Set & Driver Ref: FRAFT20
Professional Lock Nut Removal Tool Set
AFT10 set with heavy duty one-way impact driver for use
by competent users when an impact gun is not available.
Price: £140.00 (£164.50 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Long Reach Coil Spring Compressor Ref: FRTA34
Coil Spring Compressors
For the easy stripping and replacement of Macpherson
strut and standard coil springs.
Professional Compressor Set
Heavy duty forged twin hook arms with
two sets of extra long reach legs (295mm
& 390mm). 21mm hexagon and 1/2” sq dr.
Price: £67.50 (£79.31 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Coil Spring Compressor Ref: FRTA30
For the easy stripping and replacement of Macpherson
strut and standard coil springs.
Double Hook Pattern
Set of two, with drop forged arms.
1/2” sq dr / 13/16” A/F drive nut
Price: £22.32 (£26.23 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 10pc Ball Race Seal Driver Ref: FRTA157
10 pce Bearing Race / Seal Driver
Professional quality with handle and nine
metal collars (40-81mm diameter) to provide
the correct size driver for most seal, bearing,
or bush installations. The reverse side of the
collar can also be used to drive seals. Supplied
in a blow mould case.
Price: £53.78 (£63.19 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Seal Removal Tool Ref: FRTA150
Seal Removal Tool
Two tip sizes for removing oil and grease
seals on cars and light commercial vehicles.
Price: £5.18 (£6.09 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Bearing Packer Ref: FRTA155
Bearing Packer
For use with a grease gun.
Forces out old grease and evenly
injects fresh grease into bearing.
Price: £4.86 (£5.71 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
 | FRANKLIN Tyre Pressure Gauge 6-50psi Ref: FR011T
Price: £4.64 (£5.45 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Fan Hub Spanner 32mm Ref: FR0432
Viscous Fan Hub Spanners
Special cranked design with plastic handle grip, for
use on engines with thermo-viscous fan hubs :
32mm O/E Jaw - BMW / Ford
For BMW 316, 520i, 525i, 530i, 535 and
Ford Sierra, Granada 2.0, 2.3, 2.8, Transit etc.
Price: £7.47 (£8.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Fan Hub Spanner 36mm Ref: FR0436
Viscous Fan Hub Spanners
Special cranked design with plastic handle grip, for
use on engines with thermo-viscous fan hubs :
36mm O/E Jaw - Ford / GM
For Ford Granada 2.4 & 2.9 and GM Carlton
Manta, Senator etc.
Price: £7.47 (£8.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Tool - BMW 3 (E36) Ref: FRAFT41
Ball Joint Tool - BMW 3 series (E36)
Professional Quality tool
designed for use in-situ
to remove & install press fit
ball joints as used on BMW
3 series (E36)
control arms.
NOT FOR USE WITH AIR
IMPACT GUNS
Price: £137.70 (£161.80 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator 50-80mm 22mm Ref: FRTA331
Price: £43.83 (£51.50 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator (45mm Adj) 23mm Ref: FRTA335
Price: £25.16 (£29.56 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator 12" Fork 19mm Ref: FRTA338
Price: £7.16 (£8.41 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator 30-58mm 22mm Ref: FRTA330
Price: £25.38 (£29.82 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 10 pc Hub & Shaft Puller Set Ref: FRTA969
10 pce Hub & Shaft Puller Set
Capacity 90-140mm / 130-180mm for use
on front hubs or rear shafts using either
the slide hammer or the forcing screw.
Chrome vanadium steel legs.
Supplied in a sheet steel case.
Price: £94.50 (£111.04 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 25pc Hydraulic Puller Set Ref: FRTA985
25 pce 10 Ton Hydraulic Puller Set
A comprehensive master set of two / three leg
pullers with a forged steel bearing separator.
10T Hydraulic ram (1.5” fine pitch thread)
Nose piece with 2” & 4” extension pieces.
Two and three position heads and a 1.5” boss.
4” 6” & 8” sets of three forged alloy steel legs.
75 - 105mm Bearing Separator with beam and
main rods with extension rods. Metal case.
10 Ton Hydraulic Ram Unit
1.5” fine pitch thread
Bearing Separator
Capacity 75 -105mm
Price: £197.10 (£231.59 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 5T Universal Hub Puller Ref: FRTA979
Universal Hub Puller - 5/8” UNF
Suitable for use on vehicles with 4 / 5 stud hubs.
95 - 128mm p.c.d. Professional quality puller
complete with high tensile forcing screw.
Also suitable for use with a slide hammer
with a 5/8” UNF thread.
Price: £24.89 (£29.25 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 11pce Slide Hammer / Puller Set Ref: FRTA977
11 pce Slide Hammer / Puller Set
Professional quality for general and
automotive use with 2.50 kg x 570mm slide
hammer and hub / dent / lip pullers.
Capacity : Internal 2 leg 35-110mm x 82mm,
3 leg 50-135mm x 82mm reach.
External 2 leg 50-140mm x 75mm reach,
3 leg 20-135mm x 75mm reach.
Price: £91.17 (£107.12 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Universal Hub Separator Ref: FRTA975
Universal Hub Separator
Supplied in steel case. Heavy duty tool with
strong 5mm steel plate body, efficient smooth
action Acme threads on both the forcing and
adjusting screws. The yoke attaches to the hub
or struts using bolts to provide a secure fitment.
For use on most popular front wheel drive
vehicles when replacing brake discs, wheel
bearings etc. e.g. Daihatsu, Fiat, Ford, Honda,
Hyundai, Mazda, Mitsubishi, Opel, Renault,
Saab, Subaru, Toyota, Vauxhall, Volkswagen etc
Price: £199.95 (£234.94 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 5pce Blind Bearing Puller Set Ref: FRTA976
5 pce Blind Bearing Puller Set
A split collet type internal puller suitable
for extracting bearings from blind housings.
The four chrome molybdenum steel collets
expand to give a positive grip in the inner
bearing race. Capacity : 10-14mm, 15-19mm,
18-25mm, 25-32mm. Supplied with a 900gm
slide hammer in a blow mould case.
Price: £142.20 (£167.09 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 1T Micro Bearing Puller Ref: FRTA970
Micro Bearing Puller
Professional quality micro puller for the quick
and safe removal of small bearings (including
ISO bearings 637 638 639 668 688 689 697
698 699 6001 6002 6003 6200 62016202 6300
6301 6302 6800 6801 6803 6900 6901 6902
6903 with adequate clearance around the o/d)
Self centring force screw 13 mm hexagon drive
& T bar. Spring loaded drop forged legs
Spread : 19 mm - 45 mm Reach : 73 mm
Capacity : 1 tonne. Screw collar tightens as
force is applied to provide a positive non-slip
pulling action
Price: £49.50 (£58.16 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Vauxhall Steering Wheel Puller Ref: FRTA94
Steering Wheel Puller - GM
For use on Vauxhall / Opel vehicles allowing
the steering wheel to be easily removed.
The hardened and tempered steel legs are
removable and keyed to enable them to be
accurately rotated and quickly located.
19mm (3/4") AF hexagon head drive screw.
Price: £29.25 (£34.37 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Strut Nut Tool V.W. / Rover Ref: FRTA351
Price: £7.16 (£8.41 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Sub-Frame Alignment Tool FORD Ref: FRTA32
Sub-frame Alignment Tool - Ford
For use on Mondeo and Fiesta models 1996 on.
Enables the sub-frame to be aligned with the
chassis on re-assembly following clutch
replacement etc.
Price: £39.15 (£46.00 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Hub Nut Skt MAN 3/4"dr Ref: FRAF911
Lock Nut Socket- MAN
3/4” dr for nuts having six
11 mm lugs, i/d 63 mm and
o/d 85 mm.
Price: £72.00 (£84.60 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Hub Nut Skt VOLVO 3/4"dr Ref: FRAF913
Hub Nut Socket - VOLVO
105 mm hexagon 3/4” dr
Price: £80.00 (£94.00 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Hub Nut Skt MAN F90 3/4"dr Ref: FRAF914
Hub Nut Socket - MAN F90
3/4” dr six lugs for nuts having
twelve 12 mm lugs, i/d 86 mm
and o/d 110 mm.
Price: £125.00 (£146.88 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Collar Nut Skt MERCEDES 3/4"dr Ref: FRAF912
Lock Nut Socket - MERCEDES
3/4” dr for nuts having six
8 mm lugs, i/d 50 mm and
o/d 70 mm.
Price: £76.50 (£89.89 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Suspension Bush Tool - Mondeo Ref: FRTA994
Rear Bush Tool - Ford Mondeo
Allows the rear suspension knuckle / tie
bar damping bush to be replaced in situ
without removing the assembly from the
vehicle.
Price: £43.20 (£50.76 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - Rover 200 400 600 Ref: FRTA993
Rear Bush Tool - Rover 200 / 400
Allows the rear trailing arm mounting bush
to be removed in situ without removing the
trailing arm assembly from the vehicle.
Also suitable for Honda Accord Concerto and
Civic models. (shown with bush)
Price: £135.00 (£158.63 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Pivot Bush Tool - Peugeot 406 Ref: FRTA992
Rear Bush Tool - Peugeot 406
Allows the outer pivot bush to be replaced
in situ without removing the rear suspension
lower arm or stub axle from the vehicle.
Peugeot 406 1.8 1.9 2.0 (1996 onwards)
Price: £43.20 (£50.76 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Suspension Bush Tool - Vectra Ref: FRTA991
Rear Bush Tool - GM Vectra
Allows upper & lower damping bushes to
be replaced in situ without removing the
trailing arm assembly from the rear
suspension. 1.6 1.8 2.0 (1995 onwards)
2.5 (1996 onwards)
Price: £43.20 (£50.76 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Installer Golf IV / A3 Ref: FRAFT81
Suspension Bush Insertion Tool
Fine pitch thread with thrust bearing enables the
replacement rubber / plastic bush to be easily
inserted in a controlled manner without damage
Replacement bush shown but not included
VW GOLF IV / VW BORA / VW BEETLE
AUDI A3 / SEAT LEON & TOLEDO 2001 on
Price: £74.48 (£87.51 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - Ford Ka / Fiesta Ref: FRAFT82
Suspension Bush Tool
Fine pitch thread with thrust bearing enables the rear axle
mounting bushes to be removed / inserted - without
removing the Trailing Link Suspension Assembly.
For removing & installing rear
axle suspension bushes on
FORD KA / FIESTA 1996 on
|
