 | FRANKLIN LOCK NUT REMOVAL TOOL Ref: FRAFT10
FEATURES
-As used by leading roadside recovery operations
-This is a patented tool designed to enable bona fide motor traders/ tyre fitting bays to remove rounded wheel nuts and locking wheel nuts in an emergency, when the original security key has been lost or mislaid.
-This professional quality tool is manufactured in Sheffield to high standards using S1 steel for the blades allowing it to be used with an air impact wrench.
-Comes with clear instructions on how to use and which items to use with which locking nut. See photo below for picture of chart:
N.B. This product is intended solely for the use of bona fide motor traders/ tyre fitting bays to assist customers when the original security key is lost.
Price: £98.50 (£115.74 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Wheel Nut Removal Set A B + C Ref: FRAFT25
Price: £121.50 (£142.76 Including: VAT at 17.5%)
|
|
|
| | FRANKLIN Wheel Nut Removal Set + Driver Ref: FRAFT26
Price: £153.00 (£179.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 7pce Lock Nut Removal Tool Set Ref: FRFT707
7 pce Wheel Locknut Removal Tool Set
17, 18.5, 20, 21.5, 23, 24.5, 26 mm
Special reverse left hand threaded sockets for
removing damaged nuts & studs - also suitable
for use on some security locking wheel nuts
where the key has been lost or damaged.
Price: £35.55 (£41.77 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 3pc Alloy Wheel Nut Set Ref: FRFT704
3 pce Alloy Wheel Nut Sockets
Deep 17 19 & 21mm x 1/2 dr
Price: £20.88 (£24.53 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Wheel Nut Set & Driver Ref: FRAFT20
Professional Lock Nut Removal Tool Set
AFT10 set with heavy duty one-way impact driver for use
by competent users when an impact gun is not available.
Price: £140.00 (£164.50 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Long Reach Coil Spring Compressor Ref: FRTA34
Coil Spring Compressors
For the easy stripping and replacement of Macpherson
strut and standard coil springs.
Professional Compressor Set
Heavy duty forged twin hook arms with
two sets of extra long reach legs (295mm
& 390mm). 21mm hexagon and 1/2” sq dr.
Price: £67.50 (£79.31 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Coil Spring Compressor Ref: FRTA30
For the easy stripping and replacement of Macpherson
strut and standard coil springs.
Double Hook Pattern
Set of two, with drop forged arms.
1/2” sq dr / 13/16” A/F drive nut
Price: £22.32 (£26.23 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 10pc Ball Race Seal Driver Ref: FRTA157
10 pce Bearing Race / Seal Driver
Professional quality with handle and nine
metal collars (40-81mm diameter) to provide
the correct size driver for most seal, bearing,
or bush installations. The reverse side of the
collar can also be used to drive seals. Supplied
in a blow mould case.
Price: £53.78 (£63.19 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Seal Removal Tool Ref: FRTA150
Seal Removal Tool
Two tip sizes for removing oil and grease
seals on cars and light commercial vehicles.
Price: £5.18 (£6.09 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Bearing Packer Ref: FRTA155
Bearing Packer
For use with a grease gun.
Forces out old grease and evenly
injects fresh grease into bearing.
Price: £4.86 (£5.71 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
 | FRANKLIN Tyre Pressure Gauge 6-50psi Ref: FR011T
Price: £4.64 (£5.45 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Fan Hub Spanner 32mm Ref: FR0432
Viscous Fan Hub Spanners
Special cranked design with plastic handle grip, for
use on engines with thermo-viscous fan hubs :
32mm O/E Jaw - BMW / Ford
For BMW 316, 520i, 525i, 530i, 535 and
Ford Sierra, Granada 2.0, 2.3, 2.8, Transit etc.
Price: £7.47 (£8.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Fan Hub Spanner 36mm Ref: FR0436
Viscous Fan Hub Spanners
Special cranked design with plastic handle grip, for
use on engines with thermo-viscous fan hubs :
36mm O/E Jaw - Ford / GM
For Ford Granada 2.4 & 2.9 and GM Carlton
Manta, Senator etc.
Price: £7.47 (£8.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Tool - BMW 3 (E36) Ref: FRAFT41
Ball Joint Tool - BMW 3 series (E36)
Professional Quality tool
designed for use in-situ
to remove & install press fit
ball joints as used on BMW
3 series (E36)
control arms.
NOT FOR USE WITH AIR
IMPACT GUNS
Price: £137.70 (£161.80 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator 50-80mm 22mm Ref: FRTA331
Price: £43.83 (£51.50 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator (45mm Adj) 23mm Ref: FRTA335
Price: £25.16 (£29.56 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator 12" Fork 19mm Ref: FRTA338
Price: £7.16 (£8.41 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Ball Joint Separator 30-58mm 22mm Ref: FRTA330
Price: £25.38 (£29.82 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 10 pc Hub & Shaft Puller Set Ref: FRTA969
10 pce Hub & Shaft Puller Set
Capacity 90-140mm / 130-180mm for use
on front hubs or rear shafts using either
the slide hammer or the forcing screw.
Chrome vanadium steel legs.
Supplied in a sheet steel case.
Price: £94.50 (£111.04 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 25pc Hydraulic Puller Set Ref: FRTA985
25 pce 10 Ton Hydraulic Puller Set
A comprehensive master set of two / three leg
pullers with a forged steel bearing separator.
10T Hydraulic ram (1.5” fine pitch thread)
Nose piece with 2” & 4” extension pieces.
Two and three position heads and a 1.5” boss.
4” 6” & 8” sets of three forged alloy steel legs.
75 - 105mm Bearing Separator with beam and
main rods with extension rods. Metal case.
10 Ton Hydraulic Ram Unit
1.5” fine pitch thread
Bearing Separator
Capacity 75 -105mm
Price: £197.10 (£231.59 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 5T Universal Hub Puller Ref: FRTA979
Universal Hub Puller - 5/8” UNF
Suitable for use on vehicles with 4 / 5 stud hubs.
95 - 128mm p.c.d. Professional quality puller
complete with high tensile forcing screw.
Also suitable for use with a slide hammer
with a 5/8” UNF thread.
Price: £24.89 (£29.25 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 11pce Slide Hammer / Puller Set Ref: FRTA977
11 pce Slide Hammer / Puller Set
Professional quality for general and
automotive use with 2.50 kg x 570mm slide
hammer and hub / dent / lip pullers.
Capacity : Internal 2 leg 35-110mm x 82mm,
3 leg 50-135mm x 82mm reach.
External 2 leg 50-140mm x 75mm reach,
3 leg 20-135mm x 75mm reach.
Price: £91.17 (£107.12 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Universal Hub Separator Ref: FRTA975
Universal Hub Separator
Supplied in steel case. Heavy duty tool with
strong 5mm steel plate body, efficient smooth
action Acme threads on both the forcing and
adjusting screws. The yoke attaches to the hub
or struts using bolts to provide a secure fitment.
For use on most popular front wheel drive
vehicles when replacing brake discs, wheel
bearings etc. e.g. Daihatsu, Fiat, Ford, Honda,
Hyundai, Mazda, Mitsubishi, Opel, Renault,
Saab, Subaru, Toyota, Vauxhall, Volkswagen etc
Price: £199.95 (£234.94 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 5pce Blind Bearing Puller Set Ref: FRTA976
5 pce Blind Bearing Puller Set
A split collet type internal puller suitable
for extracting bearings from blind housings.
The four chrome molybdenum steel collets
expand to give a positive grip in the inner
bearing race. Capacity : 10-14mm, 15-19mm,
18-25mm, 25-32mm. Supplied with a 900gm
slide hammer in a blow mould case.
Price: £142.20 (£167.09 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 1T Micro Bearing Puller Ref: FRTA970
Micro Bearing Puller
Professional quality micro puller for the quick
and safe removal of small bearings (including
ISO bearings 637 638 639 668 688 689 697
698 699 6001 6002 6003 6200 62016202 6300
6301 6302 6800 6801 6803 6900 6901 6902
6903 with adequate clearance around the o/d)
Self centring force screw 13 mm hexagon drive
& T bar. Spring loaded drop forged legs
Spread : 19 mm - 45 mm Reach : 73 mm
Capacity : 1 tonne. Screw collar tightens as
force is applied to provide a positive non-slip
pulling action
Price: £49.50 (£58.16 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Vauxhall Steering Wheel Puller Ref: FRTA94
Steering Wheel Puller - GM
For use on Vauxhall / Opel vehicles allowing
the steering wheel to be easily removed.
The hardened and tempered steel legs are
removable and keyed to enable them to be
accurately rotated and quickly located.
19mm (3/4") AF hexagon head drive screw.
Price: £29.25 (£34.37 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Strut Nut Tool V.W. / Rover Ref: FRTA351
Price: £7.16 (£8.41 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Sub-Frame Alignment Tool FORD Ref: FRTA32
Sub-frame Alignment Tool - Ford
For use on Mondeo and Fiesta models 1996 on.
Enables the sub-frame to be aligned with the
chassis on re-assembly following clutch
replacement etc.
Price: £39.15 (£46.00 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Hub Nut Skt MAN 3/4"dr Ref: FRAF911
Lock Nut Socket- MAN
3/4” dr for nuts having six
11 mm lugs, i/d 63 mm and
o/d 85 mm.
Price: £72.00 (£84.60 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Hub Nut Skt VOLVO 3/4"dr Ref: FRAF913
Hub Nut Socket - VOLVO
105 mm hexagon 3/4” dr
Price: £80.00 (£94.00 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Hub Nut Skt MAN F90 3/4"dr Ref: FRAF914
Hub Nut Socket - MAN F90
3/4” dr six lugs for nuts having
twelve 12 mm lugs, i/d 86 mm
and o/d 110 mm.
Price: £125.00 (£146.88 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Collar Nut Skt MERCEDES 3/4"dr Ref: FRAF912
Lock Nut Socket - MERCEDES
3/4” dr for nuts having six
8 mm lugs, i/d 50 mm and
o/d 70 mm.
Price: £76.50 (£89.89 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Suspension Bush Tool - Mondeo Ref: FRTA994
Rear Bush Tool - Ford Mondeo
Allows the rear suspension knuckle / tie
bar damping bush to be replaced in situ
without removing the assembly from the
vehicle.
Price: £43.20 (£50.76 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - Rover 200 400 600 Ref: FRTA993
Rear Bush Tool - Rover 200 / 400
Allows the rear trailing arm mounting bush
to be removed in situ without removing the
trailing arm assembly from the vehicle.
Also suitable for Honda Accord Concerto and
Civic models. (shown with bush)
Price: £135.00 (£158.63 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Pivot Bush Tool - Peugeot 406 Ref: FRTA992
Rear Bush Tool - Peugeot 406
Allows the outer pivot bush to be replaced
in situ without removing the rear suspension
lower arm or stub axle from the vehicle.
Peugeot 406 1.8 1.9 2.0 (1996 onwards)
Price: £43.20 (£50.76 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Suspension Bush Tool - Vectra Ref: FRTA991
Rear Bush Tool - GM Vectra
Allows upper & lower damping bushes to
be replaced in situ without removing the
trailing arm assembly from the rear
suspension. 1.6 1.8 2.0 (1995 onwards)
2.5 (1996 onwards)
Price: £43.20 (£50.76 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Installer Golf IV / A3 Ref: FRAFT81
Suspension Bush Insertion Tool
Fine pitch thread with thrust bearing enables the
replacement rubber / plastic bush to be easily
inserted in a controlled manner without damage
Replacement bush shown but not included
VW GOLF IV / VW BORA / VW BEETLE
AUDI A3 / SEAT LEON & TOLEDO 2001 on
Price: £74.48 (£87.51 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - Ford Ka / Fiesta Ref: FRAFT82
Suspension Bush Tool
Fine pitch thread with thrust bearing enables the rear axle
mounting bushes to be removed / inserted - without
removing the Trailing Link Suspension Assembly.
For removing & installing rear
axle suspension bushes on
FORD KA / FIESTA 1996 on
Price: £79.20 (£93.06 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - Ford Mondeo 2001 on Ref: FRAFT83
Rear Sub-frame Bush Tool
Fine pitch thread with thrust bearing enables the rear
sub-frame bushes to be removed / inserted - without
removing the sub-frame from the vehicle.
Replacement bush shown but not included
For removing & installing
rear sub-frame bushes on
FORD MONDEO 2001 10/2000 on
Price: £79.20 (£93.06 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - Renault Laguna 2001 on Ref: FRAFT84
Rear Suspension Bush Tool
Fine pitch thread with thrust bearing enables the
front suspension bushes on the rear subframe to be
removed / inserted - without removing the subframe.
Replacement bush shown but not included
For removing & installing
rear subframe bushes on
RENAULT LAGUNA 2001 on
Price: £111.60 (£131.13 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - BMW X5 (E53) (AFT46) Ref: FRAFT46
Price: £176.40 (£207.27 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN Rear Bush Tool - BMW 5 (E39) (AFT45) Ref: FRAFT45
Price: £152.55 (£179.25 Including: VAT at 17.5%)
|
|
|
| | Franklin Wheel Nut Removal Set A B + C (AFT25) Ref: FRAFT25
Price: £121.50 (£142.76 Including: VAT at 17.5%)
|
|
|
| | Franklin Wheel Nut Removal Set + Driver (AFT26) Ref: FRAFT26
Price: £153.00 (£179.78 Including: VAT at 17.5%)
|
|
|
 | Franklin Ball Joint Tool - BMW 3 (E36) (AFT41) Ref: FRAFT41
Price: £137.70 (£161.80 Including: VAT at 17.5%)
|
|
|
 | Franklin 21 pce RH+LH Brake Service Set (TA880) Ref: FRTA880
Price: £77.40 (£90.95 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 20 pce RH Brake Service Set (TA885) Ref: FRTA885
Price: £66.00 (£77.55 Including: VAT at 17.5%)
|
|
|
 | Franklin LH Brake Service Tool (TA886) Ref: FRTA886
Price: £20.25 (£23.79 Including: VAT at 17.5%)
|
|
|
| | Franklin Rear Bush Tool - BMW X5 (E53) (AFT46) Ref: FRAFT46
AFT46 Rear Subframe Bush Tool - BMW X5
Bush replacement tool for use on rear axle carrier bushes (33311093662) as used on BMW X5 series models.
The tool features a fine pitch thread and thrust bearing to enable the rear subframe bushes to be removed / inserted - without removing the rear subframe assembly from the vehicle.
Tool shown with a replacement subframe bush - NOT INCLUDED.
Price: £176.40 (£207.27 Including: VAT at 17.5%)
|
|
|
| | Franklin Rear Bush Tool - BMW 5 (E39) (AFT45) Ref: FRAFT45
Price: £152.55 (£179.25 Including: VAT at 17.5%)
|
|
|
 | Franklin 7pce Impact Wheel Nut Set 1/2" dr (TA817) Ref: FRTA817
Price: £40.50 (£47.59 Including: VAT at 17.5%)
|
|
|
 | Franklin Pneumatic Brake Windback Tool (TA878) Ref: FRTA878
Price: £42.75 (£50.23 Including: VAT at 17.5%)
|
|
|
 | Franklin Hub Separator Set (AF975) Ref: FRAF975
Price: £85.50 (£100.46 Including: VAT at 17.5%)
|
|
|
 | Franklin HD CV Boot Clamp Pliers (AF576) Ref: FRAF576
Price: £37.35 (£43.89 Including: VAT at 17.5%)
|
|
|
 | Franklin Ball Joint Tool - BMW 5 & 7 (AFT42) Ref: FRAFT42
Price: £76.50 (£89.89 Including: VAT at 17.5%)
|
|
|
 | Franklin Rear Bush Tool - Ford Focus (AFT91) Ref: FRAFT91
Price: £138.60 (£162.86 Including: VAT at 17.5%)
|
|
|
| | Franklin Rear Bush Tool - BMW 5 Touring (AFT47) Ref: FRAFT47
Price: £198.00 (£232.65 Including: VAT at 17.5%)
|
|
|
 | Franklin Rear Bush Tool BMW 3 (E36) (AFT43) Ref: FRAFT43
AFT43 Rear Trailing Arm Bush Tool - BMW 3 series
The tool features a fine pitch thread and thrust bearing for use on the rear trailing arm bushes (33321097009) as fitted to BMW 3 series models - E36 E46 & E46 COMPACT models.
Suitable for removing ORIGINAL BUSHES and removing & installing NEW STYLE "SLOTTED" BUSHES - in situ without removing the rear trailing arm. OEM # 33321097009
to be removed / inserted - without removing the trailing arm from the vehicle.
Price: £140.85 (£165.50 Including: VAT at 17.5%)
|
|
