 | BERGEN TOOLS 3 pc EXHAUST EXPANDER SET Ref: bergexht
This set of expanders will flare and expand a pipe so you can slide another pipe inside.
It will also straighted out of shape pipes, and pipes damaged by clamps.
SIZES:
Small: 1.15" to 1.7" (29-43mm)
Medium: 1.54" to 2.31" (39-58mm)
Large: 2.10" to 3.25" (53-82mm)
Price: £27.66 (£32.50 Including: VAT at 17.5%)
|
OUT OF STOCK |
|
 | BERGEN 10pc BEARING SEAL DRIVER SET Ref: AA078
-Very handy collection of aluminium bearing and seal drivers
-Makes it easier to insert wheel bearing race and seals without damage to race and axle housing
-This master set includes nine disc sizes to fit most standard wheel bearings
-Turn discs over to drive seals.
-It comes in a very handy storage case.
Price: £31.91 (£37.49 Including: VAT at 17.5%)
|
|
|
 | BERGEN HYDRAULIC BEARING SEPARATOR SET Ref: AA084
This is a very handy tool for removing gears, bearing cones
and all other parts puller jaws can't reach behind.
Two knife edges flush to one side to ease pull and reduce risk of damage to part.
Also has advantage of 10 ton hydraulic power
10 ton hydraulic ram.
Suitable for pulling commercial vehicle size bearings from Ø120-150mm.
Maximum depth 420mm.
Supplied in steel case.
Price: £84.68 (£99.50 Including: VAT at 17.5%)
|
|
|
 | US PRO TOOLS 5pc BLIND BEARING PULLER SET Ref: AA079
Features:
This split collet type internal puller is suitable for extracting bearings from blind housings.
The four collets are made out of chrome molybdenum steel
They expand to give a positive grip in the inner bearing race.
Sizes: 10 - 14mm, 15 - 19mm, 18 - 25mm, 25 - 32mm.
Comes with a 900gm slide hammer
Price: £68.08 (£79.99 Including: VAT at 17.5%)
|
|
|
 | BERGEN 13pc SLIDE PULLER SET Ref: AA080
Features:
-External 3jaw puller - special jaws allow you to remove gears and bearings with outside pull
-Internal 3 jaw puller - when clearence is adequate, these jaws give grip needed to variety or internal pulling jobs.
-External 2 jaw puller - ideal for many close-quarter pulling jobs
-Internal 2 jaw puller - facilitates easy removal of bearing cups and outer races
-Grip wrench adapter - allows you to attach grip-type wrench to slide hammer
-Puller hook - use to remove oil seals and bearings in situations where conventional methods won't work
-Rear axle puller - removes flange type axles from most passenger cars and light trucks
-Dent puller - pulls out those hard to get at dents and creases in auto bodies
-Comes in a metal storage case
Price: £38.26 (£44.96 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN EXHAUST PIPE CUTTER SET Ref: FRAF580
Cuts and flares the tube end to accept a connecting pipe. Capacity 35-50mm + 50-65mm diameter for use on stainless steel pipes up to 3.2mm thick
-A professional quality tool - patented design cleanly cuts the pipe and flares the tube end to accept a connecting pipe. Suitable for use in a confined space where access is restricted.
-Cutting Capacity: 35 - 50mm + 50 - 65mm diameter for use on stainless steel pipes up to 3.2mm.
-Supplied with 2 + 1 spare cutters. Expexted cutter service life 200+ pipes. Spare consumable cutters are available.
-Packed in a strong polypropylene case.
Price: £84.50 (£99.29 Including: VAT at 17.5%)
|
|
|
 | BERGEN EXHAUST CUTTER Ref: AA354
-This is designed for cutting thin walled steel and copper tubing, especially exhausts
-Cuts 3" Diameter Piping
Price: £10.00 (£11.75 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 18pc UNIVERSAL CLUTCH ALIGNMENT SET Ref: FRF025
This is for the accurate alignment of the flywheel spigot and the clutch centreplate to allow the easy re-assembly of the gear box to the engine.
18pcs: 8End Bushes, 9 Centre Bushes, 1 Mandrel
-Precision machined bushes suitable for most popular British, European & Japanese cars and light vans:
-Audi, Rover, Chrysler, Citroen, Daihatsu, Fiat, Ford, Vauxhall, General Motors, Honda, Mazda, Mitsubishi, Nissan, Peugoet, Renault, Saab, Toyota, V.W., Volvo.
-This comes with clear instructions on how to use and which items to use.
Price: £26.00 (£30.55 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN 5pc LONG RING SPANNER SET Ref: FRXL570
Made out of chrome molybdenum steel.
Features:
-10x11, 12x14, 13x15, 16x18, 17x19mm
-Comes in a very handy storage pouch
-Overall length 285 - 400mm
Price: £68.75 (£80.78 Including: VAT at 17.5%)
|
|
|
 | FRANKLIN PANEL PULLER SET Ref: FR081
For the easy removal of small body dents, especially valuable when dealing with double skin panels etc.
Contents:
-3 - self tapping screws with adaptors
-1 - hss drill
-1 - 300mm, 2lbs slide hammer
Price: £21.15 (£24.85 Including: VAT at 17.5%)
|
|
|
 | BERGEN DOOR LOCK REFORMER Ref: AA158
Price: £6.38 (£7.50 Including: VAT at 17.5%)
|
|
